BR-500; 19" 1RU POWER SUPPLY FRAME FOR DISPLAYPORT 1.2
OPTICIS BR-500, 19” 1RU multi-mounting rack is a modular rack and systematic fiber-optic solution providing flexibility to install Opticis DisplayPort 1.2 modules up to 8 units. DPFX-250-Tx or DPFX-300-Tx is required in use.
Each power line of the mounting unit is connected to the central bus power of +12VDC at 4.2A. BR-500 can be fit with the dual power supplies for load-sharing and redundant backup. The BR500 adopts two (2) LEDs in the front panel for a power supply failure to run the stable system without any disruption or disconnection from the power failure.
BR-500 has one separate RJ45 Port which allows the connection through LAN cable. This connection to GUI enables access to the current power status of the individual modules and also allows to turn on/off the power of the device.
By using premium graded DisplayPort 1.2 copper cables, BR-500 can extend up to 3m (9.84ft) distance from the sources.
*Note: The DisplayPort modules and DisplayPort copper cables are sold separately.
*Slot Ordering Information*
Depending on which DP1.2 is being used, please order the correct slots with BR-500.
BR-500-ITPS-A: BR-500-with DPFX-250 Slot
(IT grade power supply)
BR-500-ITPS-B: BR-500-with DPFX-300 Slot
(IT grade power supply)
BR-500-MDPS-A: BR-500-with DPFX-250 Slot (medical grade power supply)
BR-500-MDPS-B: BR-500-with DPFX-300 Slot
(medical grade power supply)
*Optional - copper cable with lengths of 1.8m and 3m can be purchased upon request.
DISPLPORT6L (1.8m DP1.2 copper cable)
DISPLPORT10L (3m DP1.2 copper cable)
*BR-500 is applicable to use with Opticis DisplayPort 1.2 fiber-optic transmitters ONLY.
Connection Diagram
Similar Products
